7
English
►
Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the water inlet surface and the system
outer foil mark ( ) and securely attach
together.
•
The system outer foil cannot be reversely
attached.
•
Always insert the system outer foil to the
foil frame when attaching to the shaver.
►
Replacing the inner blades
1. Remove the inner blades one at a time.
•
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
2. Insert the inner blades one at a time until
they click.
►
Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑SL41
System outer foil
WES9087
Inner blades
WES9068
Removing the built‑in rechargeable battery
Remove the built‑in rechargeable battery before disposing of the
shaver. Please make sure that the battery is disposed of at an
officially designated location if there is one. Do not dismantle or
replace the battery so that you can use the shaver again. This
could cause fire or an electric shock.
Please contact an authorised service center.
•
Remove the shaver from the AC adaptor when removing the
battery.
•
Perform steps
1
to
;
and lift the battery, and then remove it.
For environmental protection and recycling of materials
This shaver contains a Nickel‑Metal Hydride battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.
Specifications
Power source
See the name plate on the AC adaptor.
Motor voltage
1.2 V
Charging time
RE7‑74
220 V
230 V
240 V
Approx. 12 hours
Approx. 10 hours
Approx. 8 hours
RE7‑73 for
South Korea 220 V
Approx. 8 hours
This product is intended for household use only.
