For model ES-LT3N, ES-LT7N, ES-LT5N
The power cannot be turned on when the switch lock lamp
blinks, as the power switch is
locked. Press the power switch for more than 2 seconds to unlock.
If you press the power switch for more than 2 seconds, the sonic vibration cleaning mode is
activated. You cannot shave in this mode.
Do not place your fingers on the power switch while using the shaver. This may cause the shaver
to lock the power switch or turn off. Place your fingers on the thumb rest while using the shaver.
The appliance may not operate in an ambient temperature approximately 5 °C (41 °F) or lower.
Depending on the beard thickness or the amount of beard trimmings in the shaver head, the
shaving sensor may not react and the driving sound may not change. This is not abnormal.
The shaving sensor may not respond depending on the type of the shaving gel and shaving
foam, but this is normal.
The shaving sensor may not respond when the remaining battery capacity is low. If this happens,
recharge the shaver.
Avoid the following situations to prevent damaging the system outer foil. Applying pressure to
any part of the system outer foil or bringing the system outer foil into contact with hard object
may cause damage on the system outer foil.
o
Shaving with only a part of the system outer foil.
o
Finger or nail coming into contact with the system outer foil.
Switching the shaver head (ES-LT3N, ES-LT5N, ES-LT7N)
You can change the pivot action.
FREE: you can move the shaver head.
LOCK: you can lock the shaver head.
For model ES-LV67
The beard under the chin and around the throat can be shaved better by stretching the skin so
the beard will stand.
To prevent damaging the system outer foil, do not shave with only a part of the system outer
foil.
While using, the remaining battery capacity are shown and then turn off after 5 seconds.
Approximate amount of battery capacity is displayed as 20 - 100.
The shaving sensor lamp blinks.
After use, the remaining battery capacity blink and then turn off after 5 seconds.
When the battery capacity is low, "20" blinks when operating the shaver.
