19
Engli
sh
4.
Switch off the shaver, and wipe off any excess oil
from the system outer foil with a soft cloth.
The mark on the left means suitable for
cleaning under an open water tap�
Warning
Disconnect the cord from the shaver before
cleaning it in water to prevent electric shock�
►
Drying the shaver without the self-cleaning recharger
Dry in a shade and apply oil.
Notes
•
Be careful not to hit the main body on the sink or any
other object while draining the water. Failure to do so
may cause malfunction.
•
Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or
discoloration of the parts.
Wipe with diluted soapy water.
•
Do not use any kitchen or bathroom detergents other
than hand soap.
Doing so may cause malfunction.
•
Do not use the self‑cleaning recharger while droplets or
soap remain on the shaver.
Doing so may change the concentration level or
composition of the cleaning liquid in the cleaning liquid
unit, which may degrade cleaning, sterilization,
lubrication and drying performance. This may also cause
cleaning liquid to spill from the self‑cleaning recharger.
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See page 20.)
Clean the system outer foil in the areas
indicated by the circles every time you
use the shaver.
►
Cleaning with the long brush
Clean the foil frame, system
outer foil, the main body
and the trimmer using the
long brush.
►
Cleaning with the short brush
•Clean the inner blades using
the short brush by moving it in
direction as illustrated.
•
Do not move the short brush
perpendicularly against the
blades as it will damage the inner
blades and affect their sharpness.
Summary of Contents for ES-LV9E
