Panasonic ES-LV5A, Operating Instructions Manual

Page: 28 / 40

28
English
While charging After charging is completed
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
The battery capacity
lamp and will light up
and then turn off after
5 seconds.
Notes
•
When charging the shaver for the first time or when it has
not been in use for more than 6 months, the charging time
may change or the charge status lamp ( ) may not glow
for a few minutes. It will eventually glow if kept connected.
•
Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge, or the charge
status lamp ( ) will blink quickly and the battery may fail
to charge properly in extremely high or low temperatures.
•
The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute shave use per day)
The number of usable days varies depending on the
following conditions.
-
Beard thickness
-
Pressure applied to the skin
-
Ambient temperature
-
Usage frequency of the sonic vibration cleaning mode
•
If there is noise from radio or other source while using
the shaver, move to a different location to use the shaver.
How to use
Shaving beard
1
Press and shave.
•
The “shaving sensor”, which
automatically adjusts the power
depending on the beard thickness, will
operate.
It will shave with high power on areas
where the beard is heavy, and reduce
the power on areas where the beard
is thin, to reduce burden on the skin.
•
The power cannot be turned on when the switch
lock lamp ( ) blinks, as the power switch is locked.
Press the power switch for more than 2 seconds to
unlock.
(See page 30.)
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver
over the face against the grain of
the beard.
•
The beard under the chin and
around the throat can be shaved
better by stretching the skin so the
beard will stand.
ES-LV5A_CH.indb 28 2016/03/11 10:19:20