Panasonic ES-LS9A, Operating Instructions Manual

Page: 17 / 478

• The shaving sensor may not respond depending on
the type and quantity of the shaving gel. This is not
abnormal.
• Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.
• To prevent erroneous operation, place your fingers on
the finger rest while using the shaver.
• The sonic vibration cleaning mode is activated when
the power switch is pressed for more than 2 seconds
while the shaver is not operating. (See page 19.)
You cannot shave in this mode.
►
Using the trimmer
1. Slide the trimmer handle up to
the “ ” position so that the
trimmer stands upright.
2. Press and use.
2
Press when finished.
Press and hold the top knob (a)
and slide the trimmer handle
down to lower the trimmer.
Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
Tips for better usage
Apply the trimmer edge perpendicular to skin gently
and move downward slowly.
17
TR
RO
H
SK
CZ
PL
FI
N
S
N
P
DK
E
NL
I
F
D
GB
When the battery capacity is low
“5%” appears.
The appliance beeps twice after switched
off.
• You can shave 1 to 2 times after “5%”
appears. (This will differ depending on
usage.)
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin
and shave by slowly gliding the
shaver over the face against the
grain of the beard.
• The beard under the chin and
around the throat can be shaved
better by stretching the skin so
the beard will stand.
• To prevent damaging the system
outer foil, do not shave with only
a part of the system outer foil.