background image

12

Notes

 •To replace the cleaning liquid, see page 18.

 •Only use self‑cleaning recharger detergent for 

Panasonic shavers. 

Not doing so may cause malfunction or failure.

 •Do not tilt the self‑cleaning recharger.  

Doing so may cause spill or the number of days that 

cleaning liquid can be used reduce.

 •You can use the cleaning liquid for approximately 

30 days if used once per day. 

(This will differ depending on beard thickness and the 

ambient temperature.)

How to use

This appliance has a smart lock function, so the power 

switch is automatically locked to prevent accidental 

operation when not shaving.

 

Unlocking the power switch

The power switch is automatically 

unlocked when the main body is grasped.

 •The lamps glow and then turn off after 

approximately 6 seconds.

 

Locking the power switch

All the lamps turn off when 

releasing the main body.

The lamps glow and the 

power switch is 

automatically locked after 

1 minute.

 •The switch lock lamp 

( ) will light up for 

6 seconds and turn off.

 •The sensor may respond and the power switch may 

be unlocked when an electrical device or metal object 

is brought closer. This is not abnormal.

Shaving beard

Press   and shave.

 •The “shaving sensor”, which 

automatically adjusts the power 

depending on the beard thickness, 

will operate. 

It will shave with high power on areas 

where the beard is heavy, and reduce 

the power on areas where the beard 

is thin, to reduce burden on the skin.

ES-LS9A_AUS.indb   12

2022/08/31   11:19:02

Summary of Contents for ES-LS9A-K841





























Reviews: