Panasonic ES-LC50, Operating Instructions Manual

Page: 15 / 24

15
English
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is
used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer
foils.
. Switch the shaver on, and run it for
approximately five seconds.
. Switch off the shaver, and wipe off any
excess oil from the outer foils with a soft
cloth.
2
Cleaningwiththebrush
Clean the inner blades using the short
brush by moving it in direction (A).
Clean the system outer foil, the shaver
body using the long brush.
Do not move the short brush in
direction (B) as it will damage the
inner blades and affect their
sharpness.
Do not use the short brush to clean
the outer foils. •
•
(A)
(B)
Replacingthesystemouterfoiland
theinnerblades
system outer foil once every year
inner blades once every two years
Replacingthesystemouterfoil
1. Press the foil frame release buttons
and lift the outer foil section upwards.
1
. Press the system outer foil release
buttons and pull down the system
outer foil.
. Align the side of the foil frame that has
a protrusion and the system outer foil
mark (

) and securely attach
together.
The system outer foil cannot be
reversely attached.
Always insert the system outer foil to
the foil frame when attaching to the
shaver.
. After turning the side of the foil frame
that has a protrusion to the front,
securely attach the outer foil section
to the shaver until it clicks.
•
•
2 3

ES-LC50_CH_GIFT.indb 15 2010/09/28 15:00:15