English
1
Follow the steps outlined below if the status lamp blinks or glows
during the “Clean/Dry/Charge” course or the “Clean/Dry” course.
Blinks
Glows
Correctly set the
detergent cartridge and
then restart a course.
Remove the shaver from the self‑
cleaning recharger and then
check that the [CLEAN] lamp has
gone out. (Be careful as the blade
may be hot or wet.) Check that
the water tank is correctly
attached, the water tank cap is
securely closed and the self‑
cleaning recharger is placed
horizontally.
If the status lamp goes
out
Continue a course.
When an abnormality has
been corrected
When no abnormality was
found
Press and hold [SELECT] for
approximately seconds to
turn off the status lamp and
then restart a course.
It is time to replace the
detergent cartridge and
cleaning liquid inside the water
tank.
Drain the old cleaning liquid
inside the water tank and then
refill it with water. Replace the
old detergent cartridge and
then restart the course.
When the status lamp
goes out
When the status lamp glows
again
Continue a course.
Contact an authorized service
center.
Cleaning the shaver without the self-cleaning
recharger
We recommend that you clean your
shaver with the self‑cleaning recharger
or the turbo mode for “sonic” vibration
cleaning when the faucet symbol
appears on the LCD panel.
1. Disconnect the power cord from
the shaver.
. Apply some hand soap and some
water to the outer foil.
3. Rotate the lock ring to unlock the
0/1 switch.
4. Press the 0/1 switch for more than
seconds to activate the turbo
mode for “sonic” vibration cleaning.
appears on the LCD panel.
After about 0 seconds, it will be
automatically turned off, or you
can turn it off by pressing the 0/1
switch.
5. Remove the system outer foil and
press the 0/1 switch for more than
seconds to activate the turbo
mode for “sonic” vibration cleaning
and clean it with running water.
6. Wipe off any drops of water with a
dry cloth.
7. Remove the system outer foil to
allow it to dry completely.
The mark on the left
is for a washable
shaver and indicates
it can be cleaned
with water.
. Lubricate the shaver.
•
•
7
