4
English
Charging with the self-cleaning
recharger
Char
ge
Thoroughly wipe off any drops of water on or around the recharger
so that it is dry before charging it.
2
3
1
1
Attach the detergent cartridge and the water
tank to the self-cleaning recharger.
Page 6
2
2
Insert the appliance plug.
3
3
Plug in the adaptor.
4
4
Remove the protective cap and then attach the
shaver.
Turn the shaver off before attaching.
Check that the outer foil is not deformed or damaged when you
are attaching the shaver.
The indicators on the LCD panel glow and charging starts.
Charging is completed when the indicators on the LCD panel
blink.
(Max. 1 hour later)
•
•
•
•
You can keep the shaver attached to the recharger, or
connected to the adaptor, when not using it to maintain full
battery capacity. You cannot overcharge the shaver.
•
Charging without the self-cleaning recharger
You can also charge without the recharger.
1. Insert the appliance plug into the shaver.
. Plug in the adaptor into a household outlet.
1
Cord shaving
If you insert the appliance plug to the shaver and plug in the
adaptor into a household outlet, you can use it even if the battery
capacity is low.
If the shaver does not work, continue charging it for approx. 1
minute.
1
•
Using the lock ring
Use the lock ring to lock or unlock the 0/1 switch.
1. Rotate the lock ring until it clicks.
Unlock the 0/1 switch:
For when shaving, washing the shaver, lubricating the
shaver, or deleting
on the LCD panel.
Lock the 0/1 switch:
For when carrying the shaver.
1
