12
English
While charging
After charging
is completed
Abnormal
charging
The charge
status lamp
(
) glows red.
The charge
status lamp
( ) turns off.
The charge
status lamp (
)
will blink twice
every second.
•
After charging is completed, turning the power switch
ON with the shaver plugged in will cause the charge
status lamp (
) to light up and then turn off after 5
seconds.
This shows that the shaver is fully charged.
•
When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
(
) may not glow for a few minutes. It will eventually
glow if kept connected.
•
Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge or the
battery may fail to charge properly in extremely high
or low temperatures.
The charge status lamp ( ) will blink twice every
second when there is a problem with charging.
Charge the shaver within the recommended ambient
temperature range.
•
The shaver can be used for approximately 2 weeks
with a full charge. (Based on one 3-minute dry-shave
usages per day in an ambient temperature range of
20 °C – 30 °C.)
The number of usable days varies depending on the
following conditions.
‑Beard thickness
‑Pressure applied to the skin
‑
Usage of wet shaving
‑
Usage in shaving foam mode
•
If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
Charging with the charging stand
ES-BST6R
1. Insert the appliance plug into
the charging stand.
2. Place the shaver on the
charging stand.
3. Plug in the adaptor into a
household outlet.
1
2
3
