Panasonic ES-BSL2, Operating Instructions Manual

Page: 12 / 20

12
English
Charge
Chargingtheshaver
Perform the following steps to charge the shaver if it
seems to lose the speed.
You can charge the shaver with the carrying holder
attached.
1
1
Turnofftheshaverand
insertitintheACadaptor
untilitclicksasillustrated.
•
Wipe off any water droplets on the
side terminals.
•
If you charge the shaver with power
switch turned on, it will start working
when you remove from the AC
adaptor.
1
2
2
2
Puttheplugintoahouseholdoutlet.
The charge indicator lamp glows red.
•
Charging is completed after approx. 8 hours.
•
When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charge indicator lamp may not glow for a few
minutes, or the operating time may shorten. Please
charge it for more than 20 hours in such cases.
3
3
Disconnecttheplugafterchargingis
completed.
•
Charging the battery for more than 8 hours will not
affect battery performance.
•
Recommended ambient temperature for charging is
0 ‑ 35 °C. The battery may not charge properly or at
all under extreme low or high temperatures.
•
The charge indicator lamp glows and stays on until
the plug is disconnected from a household outlet.
You cannot operate the shaver while charging.
Shave
Usingtheshaver
1
1
Pressthepower
switch.
2
2
Holdtheshaveras
illustratedabove
andshave.
Start shaving by applying gentle pressure to your
face. Stretch your skin with your free hand and move
the shaver back and forth in the direction of your
beard. You may gently increase the amount of
pressure as your skin becomes accustomed to this
shaver. Applying excessive pressure does not provide
a closer shave.
ES-SL41_CH.indb 12 2012/03/22 9:34:31