Panasonic ER2171, Operating Instructions Manual

Page: 5 / 116

English
5
Notes for thinning
Slide the thinning plate upwards until it clicks. Incorrect setting
may result in excessive cutting.
If a difference in level is produced, lightly thin to compensate.
If thick and thin portions are produced, or if there are portions
with an excessive amount of hair, thin the appropriate portions
to compensate. •
•
•
Cutting of hair
Cut hair to the correct height by moving the trimmer back against
the flow of the hair.
Do not use the trimmer in an inverted position. This can cut hair
too deeply.
Cutting around the ears
Cut a little, and then gently
separate the trimmer from
the hair.
Cutting the nape of the neck
Bring the trimmer gently
away from the hair to
finish.
►
•
Cleaning the trimmer
Clean
Using the cleaning brush
1. Remove the comb attachment.
2. Hold the main body, place your thumb
against the blades and then push
them away from the main body.
3. Brush off any hair trimmings
from the main body and from
around the blade.
4. Brush any hair trimmings out
from between the stationary blade
and the moving blade while
pressing down the cleaning lever
to raise the moving blade.
►