14
English
Detail trimming attachment
ER-SB60
• The trimming height cannot be adjusted.
►
How to use the detail trimming attachment
Slide the detail trimming
attachment to switch the position
of the blade to be exposed
depending on the location to cut.
►
Trim the beard in tight sections or to detailed form
Move the blade along the skin to
trim.
Without the attachment
(Trimming height: approx. 0.5 mm)
• The appliance cannot trim hair to lengths less than 0.5 mm.
►
Trimming the downy hair
Holding the appliance with the
power switch facing outwards, trim
by bringing the blade in contact
with the skin.
►
Design precise lines
1
Place the blade at a right angle
on the edge of where you want
to make a precise line.
2
Move the blade away and down
from the area you want to leave,
and cut the remaining beard.
ER-SB60_40_EU.indb 14
2017/05/25 11:00:22
