16
English
Lubrication
• Apply the oil to the blade before and after each use.
1
Remove the blade.
(See page 15.)
2
Apply a drop of the oil to
each indicated point.
3
Attach the blade to the
main body, turn on the
power and allow to run for
approximately 5 seconds.
►
Replacement parts
Replacement part is available at your dealer or Service
Center.
Replacement parts for
ER‑GK81/ER‑GK80
Blade
WER9500
• Do not use any blade other than the one dedicated
as it may cause defect in performance.
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the
store where you purchased the unit or a service
center authorized by Panasonic for repair.
Problem
Action
The main body
has become
blunt.
Operating time
is short.
Main body
stopped
functioning.
Until problems are solved, please
follow each procedure as follows:
1. Charge the main body.
(See page 9.)
2. Clean the blade and apply oil.
(See pages 14‑16.)
3. Replace the blade.
(See page 15.)
4. Have the battery replaced by an
authorized service center.
Charge the battery for
approximately 8 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
center for repair.
