on
off
on
off
TURNING ON THE POWER
First read, and familiarize yourself with, the safety precautions.
BEFORE SITTING DOWN
After checking the positions of the massage heads with your
hands, sit down slowly in the center of the Massage Lounger.
Power switch
Power plug
Controller
Controller
storage pocket
1. Using a flat screwdriver or similar object, insert
into the lock switch and turn to “open”.
8
on
off
Operating lock switch
NOTE:
Power switch
Plug the power cord into the inlet located at the rear of the chair.
Plug the power cord into an AC outlet.
Be careful not to pinch the cord under the leg frames of the chair or any other items.
The operating lock
switch prevents the
unit from being
turned “on” when
switch is in the “lock”
position.
2. Move the power switch to “on”.
When the operating lock switch is pointing toward “lock”,
the power switch cannot be moved to the “on”
position.
After each use.
Be sure to turn the power switch to “off ”.
To prevent children from using this unit, safety
lock the power switch by moving the operating
lock switch to the “lock ” position.
As a further caution, unplug the power cord from
the outlet after each use.
The massage heads should be spread apart near the top of
the Massage Lounger backrest (home position).
If the massage heads are not in the position described above,
do not sit down in the Massage Lounger. Press the “start/reset”
button on the control panel twice. Wait for the massage
heads to reach the home position before sitting down.
Range of
body height:
CONTROLLER
PROGRAMMED MASSAGE
MANUAL MASSAGE
Up/down adjustment
button
1. 1.85 m and taller
2. 1.70 m
3. 1.60 m
4-7 1.6 m and smaller
Massage mode button
Intensity adjustment button
Leg massager button
9
Gentle mode
button
Power
recline
button
Programmed massage
course button
Start/reset button
Stop button
Slide cover
Massage heads adjustment switch
Width adjustment
button
EP790K230
説
08-09
