background image

13

12

1. Reclining the seat

• Hold down the Reclining Button to recline the seat and raise the legrest.
• When both the backrest and legrest have been extended as far as possible

you will hear a “peep, peep, peep” sound.

• When first using the unit, please do not fully recline the seat.

2. Retracting the seat

• Check that there is nothing behind the seat or under the legrest.
• Hold down the Reclining Button to retract the backrest and lower the legrest.

• When both the backrest and legrest have been retracted as far as possible

you will hear a “peep, peep, peep” sound.

• When retracting the backrest, as the massage heads must be retracted in

the interests of safety there may be a slight delay before the backrest
actually starts to retract.  Please continue to hold down the Reclining Button
until the backrest is fully retracted.  

RECLINING THE SEAT

CAUTION

• Slowly sit down after checking the position of the massage heads.  

Do not exceed the maximum user weight of 264 lbs. (120kg). Before sitting down, you must first check the
position of the massage heads with your hands.  If you do not check the position of the massage heads then this
can lead to injury or the cause of the unit to malfunction.

BEFORE SITTING DOWN

• When the massage does not feel strong enough, lift up the

pillow and carry out the massage again.

• To make the massage even stronger, the center cushion

with integrated pillow can also be flipped up after unclipping
it at the bottom.

ADJUSTING THE PILLOW

ADJUSTING THE SEAT

• The massage heads are normally in the retracted position

(to the left and right at the lower part of the backrest).

• Do not sit down if the massage heads are not in the

retracted position.  Instead, push 

button twice to retract

the massage heads to the proper position.  (If the      is
pushed during the massage, then the massage heads will
not be retracted.)

• Please do not sit on the controller as the reclining button

may be pressed causing the seat to automatically recline.

Sit down only when the legrest is lowered

• If you sit on the unit when the legrest is raised, there is the

possibility that it may fall over and you may be injured.  

• When the legrest is raised, press 

button to lower the

legrest before sitting down.

WARNING:

To avoid the risk of personal injury, do not put your fingers or
any part of your body in the mechanical section of the
legrest.

reclining

reclining

Approx. 170

°

Angle 
Reclined

Approx. 120

°

Approx. 85

°

Angle 
Raised

Approx. 0

°

Angle 
Reclined

Angle 
Raised

reclining

Press

Press

Press

• To open the leg massager for a soles feet massage, grab the top of part of the ottoman on both sides and fold

out and away from you.

NOTE:

• DO NOT sit on or get off the lounger by standing on the legrest while it is folded down.

Always remove your feet from the massager prior to standing.

• DO NOT open or close leg massager while reclining.

MASSAGE FOR SOLES OF FEET

NOTE:

Position the chair at least 16 inches (40 cm) away from any wall or other obstacle to ensure adequate reclining

CAUTION

To avoid personal injury, after use, always be sure to return the legrest and backrest to their resting positions
(legrest lowered and backrest raised).
Be sure that there is no person or pet under the legrest before lowering the legrest to its resting position.

WARNING:

To avoid the risk of personal injury, do not put your fingers or any part of your body in the mechanical section of
the legrest.

Summary of Contents for EP1260
















Reviews: