Question
Answer
During operation
(continued)
Reclining
The angle of the backrest, legrest
or armrest automatically changes
at times.
The angle automatically changes in the following cases.
⁃
While body scanning
The unit body moves automatically, and gets inclined to the
angle that makes body scanning easy.
●
If you have adjusted the reclining before use, the angle will not
change.
Reclines
around 20°
Raises
around 60°
⁃
When
is pressed to end the massage.
The chair automatically returns to the upright position.
●
Only the legrest returns to the original position if the massage is
completed according to the timer.
●
If
is pressed to end the massage, all operations
immediately stop and the angle does not automatically change.
The backrest is not restored to
upright position after massaging.
Only the legrest is retracted when the motion comes to stop by
timer operation.
Press
twice to restore the backrest to the upright
position.
After use
Hand & arm
Red marks are left on the under
side of my hands/arms after a
hand & arm massage.
Marks may remain on the hands and arms after use.
These eventually fade and are not a problem.
How to adjust the <Position>
Body scanning *
The correct shoulder position
cannot be found during body
scanning of position. (The
shoulder position slips each
time.)
Correct body scanning of shoulder roller position may not be
possible for some sitting positions (such as leaning forward).
Adjust with "
▲
" and "
▼
" button.
(EN20 to EN21)
* Body scanning: action of estimating the shoulder position immediately upon startup. (EN20 to EN21)
▶
Continued on the next page
Q&A
EN39
