Panasonic EP-MA97, Operating Instructions Manual

Page: 89 / 108

EN37
▶
Continued on the next page
Adjusting the intensity
Adjustment function Buttons used Must be adjustable Auto course Manual action Air action Stretch action
Back massage
intensity
adjustment
The back massage intensity can be adjusted.
● You can check the area that is currently being massaged in the
display.
● The intensity adjustment differs according to the course and action.
ㅡ Auto course
Stretch action
]
....... 5 levels (back massage intensity scale 2,
4, 6, 8, 10)
ㅡ Manual action ....... up to 10 levels
(the level depends on the action)
● See page EN47 if the intensity is still insufficient even when set to
the highest level, or if the intensity is too strong even when set to the
lowest level.
●
The “
按摩强度
” cannot be adjusted when the action is being
switched.
<Back massage intensity display>
Adjustable
level
Current back
massage intensity
○
5 levels of intensity
adjustment
○
Maximum 5
levels of intensity
adjustment
(the level differs
according to the
massage action)
－
○
5 levels of back
massage intensity
adjustment in
stretch action
Massage
head position
adjustment
The position of the massage head can be adjusted vertically and
horizontally.
If you want to adjust the position of the massage heads that are
currently performing a massage, please adjust by pushing the
POSITION button.
● In the case of a auto course, each adjustment can be made up to 3
times.
● In the case of a manual action, when you press and hold the up
or down button, the position will continue moving until you release
your finger.
● Depending on the location, adjustment may
not be possible.
○ ○ － ○
Massage strength
select
You can detect the back massage pressure, and intensify or soften the
massage strength.
● The massage strength of each auto course has been set to the
recommended intensity.
ㅡ Swedish: Soft
ㅡ Deep, Shiatsu, Quick: Strong
ㅡ Stretch, Neck/Shoulder, Upper back, Lower Back/Hip, Core:
Standard
Adjust the setting to suit your preference.
●
There is no difference between massage
strength for treatments on the “
颈部
” and “
臀部
”
using a single “
捶拍
” action.
○
Adjusting the
overall massage
strength of a
course
○
Adjusting the
massage strength
during an action
－
○
Adjusting the
massage strength
on the back
currently in action
Back massage pressure
display ........................... Displays the back pressure
acting on the upper massage
heads.
● Depending on the action, the indication in the
display may not match the actual sensation.
● Treatments using a single “
捶拍
” action on the
“
颈部
” and “
臀部
” areas are not displayed.
Tap
Tapping can be added to an action.
● Tapping cannot be turned OFF/ON when massaging with only a
tapping action.
－ ○ － －
Repeat
The massage action that is currently in operation can be repeated.
● “
动作重复
” may not be valid when the action is being switched.
● will flash when an action is being repeated.
○ － －
○
(Only for Auto
course)
Skip
Skips the massage action that is currently in operation and goes to the
next action.
● “
动作略过
” may not be valid when the action is being switched.
● Upon pressing the “
动作略过
” button,
will flash for about 5 seconds and
then the next action will be displayed.
○ － －
○
(Only for Auto
course)
Items that have this mark can be saved and used with your favorite
course. (Page EN29)