37
English
Caring for the wood armrests
1
Wipe with a cloth that has been soaked in a mild
detergent and then thoroughly wrung out.
2
Next wipe with a cloth that has been moistened
with just water and thoroughly wrung out.
3
Allow to dry naturally.
Please do NOT use chemicals such as thinners, benzine, alcohol or wax.
•
Moving the Unit
See Caution No. 18 on page 3.
Do not drag or push the unit in an installed state.
Do not move the unit using the wheels on the floor. (Always place a mat or similar object underneath.)
The floor may be damaged.
Moving by lifting it with 2 persons
Move the unit by having one person firmly hold onto the fabric section on the
underside of the legrest and another person use the groove on the back cover of
the backrest.
Fabric section
Groove
Place the controller and
power cord on the seat
Legrest
Back cover
Hold onto the fabric section on
the underside of the legrest.
Place your
fingers in
the groove.
* You may damage the floor by dropping the unit if you do not hold it correctly.
Never carry by the armrest, because it may get damaged.
To put the unit down on the floor
Put the unit down slowly and carefully watch your step.
Put down the legrest by holding it with your hands until it has been set on the floor completely. If you release your hands
before the legrest is fully extended, the legrest will forcefully return to the initial position.
•
•
•
