E19
English
USING “MANUAL” MASSAGE
Avoid massaging any one part of your body for more than 5 minutes at a time.
•
Failure to observe this may result in an adverse effect or injury.
Press the
button to select preferred massage operating mode.
(The power will turn off automatically if no operation is performed within 3 minutes.)
Basic massage (when used with a single operation)
1
Select the types of massage using the
buttons.
Select the types of massage from Neck roll, Neck knead, Knead, Tap and Back roll.
2
Press
buttons when
selecting a massage
operation.
* The chosen operation is encircled by a frame.
<Types of massage>
Type
Operation
1
Neck roll
Neck roll
2
Neck knead
Neck knead
3
Knead
Knead downwards
Knead upwards
4
Tap
Normal
Soft
5
Back roll
Full
Partial
3
Press the
button.
The massaging position is automatically set.
The massage starts with the selected operation.
If “Neck roll,” “Neck knead,” or “Back roll” are selected, the
operation starts by the approximate location of the
shoulders being checked.
(Foot massaging does not simultaneously start)
(See page E15.)
<Note>
If the
button is pressed without an operation being
selected, the same operation will be selected that was
operated when the button was pressed once.
When choosing an operation, the selection sequence can be
reversed by pressing button.
When using a combination of several massage operations
(Example) When selecting “Knead (Upwards)”, “Tap (Normal)” and “Back roll (Partial)”
1. Use the buttons
to select the type of
“knead” massage.
2. Select “Knead upwards”
with button.
* The chosen operation is
encircled by a frame.
3. Align with “tap” via
the
button, and
select operation
“Normal” with
button.
* The chosen operation
is encircled by a frame.
4. Select “Back roll”
with button and
“Partial” with
button.
* The chosen operation
is encircled by a
frame.
5.
Press the
button to operate.
<Note>
Select the massage type using
buttons, if button is pressed the
combinations of available massage types are displayed.
[Example]
If “Neck roll” is selected, “Tap (Normal)” or “(Soft)” can be selected.
To cancel the selection of a massage operation while setting an operation
Press button to cancel a framed operation which is selected.
*The selected type flashes.
