21
Skin test (allergy test) procedure
Please perform a skin test using the appliance in combination with your skin
care products to check if this appliance is applicable to your skin.
The test is required to prevent skin problems.
1
Clean the test area (inner arm)
with soap and water, and dry it
with a towel.
2
Follow steps 1 - 2 on pages
26 - 27, and select the
MOISTURIZING mode.
•
If using skin care products
containing vitamin C, select
the BRIGHTENING mode.
3
Keep the IONIC head in
contact with the inner arm for
approx. 10 seconds.
•
The head vibrates.
(See page 11.)
4
Wait for 48 hours.
If any reaction occurs in the skin within 48 hours
Stop using this skin care product together with the appliance.
Check before use
Before use, disconnect the adaptor and remove the protective cap.
•
The power cannot be turned on with the adaptor connected.
CAUTION
•
Do not use the appliance on the upper
eyelid or throat.
Note
•
The recommended operating
temperature range is 15 °C or above.
The IONIC head may not warm up
when the operating temperature is not
within the recommended range.
Protective
cap
EH-XT30_HK(200408).indb 21
2020/4/8 8:56:53
