10
English
Maintenance of the hair dryer
Make sure to turn OFF the power switch and disconnect the
plug from the household outlet. (Except when performing
maintenance on the air outlet)
Maintaining the hair dryer
Clean the main body when the hair dryer gets dirty.
Clean the housing only with a soft cloth slightly dampened
with tap water or soapy tap water.
►
Notes
●
Do not use alcohol, polish remover, or detergent (liquid hand
soap, etc.).
-
Doing so may cause malfunction, cracking/discoloration of
parts, etc.
●
Leaving the hair dryer with hair products or makeup still
adhered to the handle or body may degrade the plastic,
causing discoloration or cracking, and malfunction.
Maintaining the ion outlet
Clean the ion outlet about once every 6 months.
●
Use commercially available cotton swabs. (We recommend
the thin cotton swabs made for
use with babies.)
●
This maintenance allows the
hair dryer to sustain the
generated level of ion over a
long period.
●
Softly insert the cotton swab
until it stops (approximately
6 mm), and turn it softly for 2 or
3 times.
Maintaining the air inlet
Clean the air inlet once a month or over.
●
Wipe to clean lint, hair, or other matter from the air inlet with
a tissue or toothbrush.
●
Do not press or rub the air inlet with a nail or other sharp
object. Doing so may damage the air inlet.
(a)
In case of any dust inside
air inlet:
Suggest to remove it with
a vacuum cleaner (a).
Maintaining the air outlet and the cool air outlet
Clean the air outlets once a month or over.
●
The hair dryer should be plugged into the household outlet
only in case of maintenance for the air outlets.
●
Use a commercially available toothbrush.
●
Set the cool-shot switch to “Cool” and blow away the dust,
hair etc. blocking the mesh as you scrub with the toothbrush.
●
During maintenance, do not block the air inlet with your
hands, etc.
●
Be careful when using the hair dryer for the
first time after maintenance, since it may blow
out dust, etc.
Ion outlet
(one on each
side)
Gently rub the tip of
the needle portion
