17
English
Maintaining the air inlet
Do this about once a month or over
Wipe to clean lint, hair, or
other matter from the air inlet
with a tissue or toothbrush.
If dust is attached to the
inside, remove it with a
vacuum cleaner.
Vacuum
cleaner
►
Note
• Do not press or rub with your nails or sharp items.
Doing so may cause the air inlet to break.
Maintaining the nanoe™ outlet and the
mineral ion outlet
At least once a month
In order to maintain the generation amount of nanoe™ and
mineral ion.
1. Prepare a commercially available
new cotton swab.
2. Gently insert the swab in the
nanoe™ outlet and the mineral
ion outlet until it stops (about
10 mm), and then turn the cotton
swab 2-3 times carefully.
nanoe™ outlet
Mineral ion outlet
►
Note
• It is easier to clean the nanoe™ outlet and the mineral ion outlet
with a narrow cotton swab (for example, one intended for babies).
Maintaining the main body
Do this when dirty
To clean the hair dryer (when it is dirty), soak
a cloth in the soapy water and squeeze it out
fi
rmly, then wipe with the cloth.
►
Notes
• Do not use substances such as alcohol, nail
polish remover or detergent (hand soap).
Doing so may result in malfunction or part
cracks or discoloration.
• Do not leave the appliance with hairdressing
products or cosmetics on it.
Doing so will cause deterioration of the
plastic, leading to discoloration and cracks.
alcohol
polish
remover
EH-NA98_EU.indb 17
EH-NA98_EU.indb 17
15/8/2562 15:01:01
15/8/2562 15:01:01
