5
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions
1. Remove 5 Screws at Press Plate Cover by Phillips
screwdriver (Plus Driver).
2. Remove Press Plate Cover by Slotted screwdriver (Minus
Driver). Remove it from around hook, as seen in Figure
below.
3. Remove Electrification Board assy by Slotted screwdriver
(Minus Driver).
4. Take off Shaft Cover by Slotted screwdriver (Minus
Driver).
5. Remove screws at Shaft by Phillips screwdriver (Plus
Driver).
6. Push out and remove Shaft by tiny Phillips screwdriver
(Plus Driver).
7. Remove 4 Screws of Heater Side by Phillips screwdriver
(Plus Driver).
Summary of Contents for EH-HS70
