Panasonic EB-X700, Service Manual

Page: 51 / 113

– 6-3 –
6.4.7. Power Supply
Two power supplies is required to provide power to the PCB via the PCB Repair Jig while a second unit is required to
provide power baseband calibration and unit testing.
6.4.5. USB Data Cable Kit (Part No. WY80023A)
Figure 5.4: USB Data Cable
The data cable is used for software download and calibration.
6.4.4. Power Cable (Part No. 3WZ001130AAA)
6.4.3. RF Test Jig (Part No. 3WZ001141AAA)
The power cable provides the necessary connections between the PCB repair jig / dummy battery and external power supply.
The RF Test Jig provides the connections between the test and the phone for unit testing.
It also provides power supply for the phone. The following spares item is available for the RF Test Jig.
8
RF Probe (Part No. : MS156HRMJ3)
Figure 5.3: Power Cable
Figure 5.2: RF Test jig
6.4.6. Calibrated Torque Screwdriver
This screwdriver is required to secure the case screws on the phone. It must have settings for 1.3kgf and 2.5kgf.
6.4.8. GSM Test Set
This unit acts as a base station providing all the necessary GSM signalling requirements and also provides GSM signal
measuring facilities.
PROVISIONAL ISSUE