Using Voice Commands
Before any of the phone’s voice activated functions can be used, it is
necessary to configure the phone so that it will recognize a particular voice
and intonation.
Voice Dial Entry Setup
This function allows the user to recall and dial numbers from the
Phonebook using voice commands.
1
From
Idle
F Q
, select
Phonebook
>
Voice Command
>
Voice Dial
F Q
2
F Q
to add a new Voice Dial entry to the list
3
Browse through the Phonebook to select an entry which is to be
attributed with a voice command,
F Q
twice
Note:
Each recording is short in length, so be prepared to speak soon after
initiating the recording.
4
When ready, the user should hold the phone approximately 20cm
from his/her mouth,
F Q
and speak clearly into the
microphone to record the name of the selected Phonebook entry
When the recording has stopped, it will be necessary to repeat the name.
5
When prompted,
F Q
and repeat the name
When recording is completed for a second time, the display will indicate if
the recording was successful or not. If unsuccessful, repeat from step 4.
Recalling Voice Dial Entries
From
Idle
move and hold the navigation key (
g
) in any one of the four
directions
a
,
b
,
c
or
d
. Speak clearly the name you wish to recall (exactly
as recorded) and wait.
The above procedure will recall the phone number and the recorded Voice
Dial entry is repeated; to initiate the call
F D
.
19
Phonebook
