All Calls
displays the accumulated duration and call charge, if
available, of incoming and outgoing calls. The lock code or
PIN2 is required to reset the timer and call charge.
Call Waiting
allows you to receive a second call during your
current call. When updating or checking the status of call
waiting the phone must be registered with a network.
Caller’s ID
allows you to check the status of Caller’s
Identification. The phone must be registered with a network.
Using
Withhold ID
it is possible to check if you send Caller’s
Identification information when you make a call. When checking
the Status of Withhold ID the phone must be registered with a
network.
Call Charge
will set the cost of each unit for call charge
information and the required currency in which call charge is
displayed.
Using
Max Cost
can restrict use of the phone to a specified
number of units.
NOTE: The duration of one unit may vary during the day, peak and
off-peak times. Therefore, the call charge can be calculated
accordingly. However, call charge information may not give an
accurate reflection of the tariffs charged by your Service Provider.
Call Divert
When
Call Divert
is enabled the divert icon (
t
) is displayed.
You can divert voice, fax and data calls using different
circumstances and to different phone numbers.
When updating or checking the
Status
of Call Divert the phone
must be registered with a network.
39
Menu Structures
Call Divert
Voice Calls
Fax Calls
Data Calls
Cancel All
Status
B
