Panasonic EA-7HW02AP1, User Manual

Page: 56 / 62

56
4.1. Setting of PC for Web console use
The following are descriptions of how to connect a PC for web console use and of how to configure the setting of this
product.
Recommended environment of PC for Web console use
OS and TCP/IP software Microsoft
®
Windows
®
7
Microsoft
®
Windows
®
8.1
TCP/IP software is provided with OS. It is unnecessary to prepare
separately.
Resolution 1024 x 768 pixels or more
LAN card An Ethernet port is required on the PC in use to connect this product to the
PC. When using a LAN card, prepare one that can be installed on your PC.
Web browser When using web console to configure the settings of this product, prepare
the following web browser.
Microsoft
®
Internet Explorer
®
11 or later
* Access to the same AP from multiple web browsers is not supported.
▌Preparation of LAN card
Make sure that the PC for web console use has an Ethernet port. No Ethernet port is found.
It is required to install a LAN card on the PC. When newly installing a LAN card, installation of software for LAN card
(network driver) is required. Configure the settings correctly by following the manuals provided with the PC and the
LAN card.
▌TCP/IP protocol setting
When using the web console, it is required to complete the IP address and the subnet mask setting using the PC for
web console use.
The setting procedure varies depending on OS of the PC. On this document, descriptions are provided supposing
Microsoft
®
Windows
®
8.1 is installed on the PC.
Configure the TCP/IP setting of the PC.