Panasonic DX-600 Network Fax Manual Download

Page: 230 / 255

Troubleshooting

230

Email ABBR Programming Errors

Error : <Programmed ABBR overwrite
prohibited. Use open ABBR only.>

Can not overwrite existing programmed data, use the "Delete"
command to erase the existing data first.

Permission denied : <Password is
incorrect.>

Correct the password and try again.

Permission denied : <Remote Dialler
Update parameter is set to "Invalid".>

Set the Remote Dialler Update parameter to "Valid".

Format Error : <error line>

The format of the Entry is incorrect / incomplete or the data string for
each station is not defined within a single line.

Warning : <error line>

The format of the Entry is incorrect or the number of characters
entered, exceed the maximum allowed in the field. Correct it and try
again.

Warning : Field limit exceeded<error line>

The maximum number of Station Name, Domain Name, Sender
Name, Program Name, etc were exceeded.

Error message

Possible cause

Summary of Contents for DX-600
































































































































































































































































Search results

Summary of Contents for DX-600

Reviews:

Related manuals for DX-600

Brands by name

Popular brands

Panasonic DX-600, Network Fax Manual

Search results

Summary of Contents for DX-600

Reviews:

Related manuals for DX-600

Brands by name

Popular brands