Getting Started
E
NGLISH - 16
Setting up
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,
Cautions when setting the projectors
When placing the projector in confined space, a ventilation or air conditioning system must be equipped, and keep enough
ventilation space on the rear and both sides of the projector.
Projection method
Setting on a desk/floor and
projecting from front
Mounting on the ceiling and
projecting from front
INSTALLATION
: FRONT/FLOOR
COOLING CONDITION
: FLOOR SETTING
INSTALLATION
: FRONT/CEILING
COOLING CONDITION
: CEILING SETTING
Setting on a desk/floor and
projecting from rear
Mounting on the ceiling and
projecting from rear
INSTALLATION
: REAR/FLOOR
COOLING CONDITION
: FLOOR SETTING
INSTALLATION
: REAR/CEILING
COOLING CONDITION
: CEILING SETTING
NOTE:
• A translucent screen is required for rear projection.
• See more detailed setting up instructions,
INSTALLATION
and
COOLING CONDITION
in
PROJECTOR SETUP
menu on the functional
instructions in the CD that is provided with the projector.
• Do not place or use a projector on top of another projector.
NOTE:
• Do not stack the projectors without using frame or shelf.
• Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause
damage or injury.
• Avoid heating or cooling air of the air conditioning systems directly blow on to the projector ventilation
openings.
• You can tilt the projector within ± 15 degrees horizontally.
STANDBY(RED)/
ON(GREEN)
LAMP
TEMP
FILTER
STANDBY(RED)/
ON(GREEN)
LAMP
TEMP
FILTER
over 50 cm (20")
over 50 cm (20")
over 50 cm (20")
over 10 cm (4")
