Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 139
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DISABLE]
Disables the No signal shut-off function.
[10MIN.] - [90MIN.]
Sets the time in increments of 10 minutes.
[REMOTE2 MODE]
You can set the <REMOTE 2 IN> terminal.
1) Press
as
to select [REMOTE2 MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT]
Uses pin assignment of the <REMOTE 2 IN> terminal in standard setting. (
x
page 206)
[USER]
Changes the setting of the <REMOTE 2 IN> terminal.
f
When [USER] is selected, proceed to Step
3)
.
3) Press the <ENTER> button.
4) Press
as
to select one from [PIN2] to [PIN8], and press
qw
to switch the setting.
[FUNCTION BUTTON]
Set the function of the <FUNCTION> button on the remote control.
1) Press
as
to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f
The
[FUNCTION BUTTON]
screen is displayed.
3) Press
as
to select a function.
[DISABLE]
Disables the <FUNCTION> button.
[P IN P]
Switches the [P IN P] setting ([OFF], [USER1], [USER2], or [USER3]). (
x
page 144)
[SUB MEMORY]
Displays the sub memory list. (
x
page 149)
[SYSTEM SELECTOR]
Switches the [SYSTEM SELECTOR] setting. (
x
page 89)
[SYSTEM DAYLIGHT VIEW]
Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x
page 87)
[FREEZE]
Temporarily pauses the image. (
x
page 123)
[WAVEFORM MONITOR]
Displays the waveform of the input signal. (
x
page 123)
[LENS MEMORY LOAD]
Loads the registered lens memory. (
x
page 141)
[LEFT/RIGHT SWAP]
*1
Switches the [LEFT/RIGHT SWAP] setting. (
x
page 104)
[PROJECTION METHOD]
Switches the [PROJECTION METHOD] setting. (
x
page 126)
*1 Only for PT-DZ21K2, PT-DS20K2
4) Press the <ENTER> button.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector.
Setting the time zone
1) Press
as
to select [DATE AND TIME].
2) Press the <ENTER> button.
f
The
[DATE AND TIME]
screen is displayed.
3) Press
as
to select [TIME ZONE].
4) Press
qw
to switch [TIME ZONE].
