RQTC0145
8
Connection/The remote contr
ol/Q
UICK SETUP
STEP 1 Connection
COAXIAL IN
Amplifier with a built-in decoder or a
decoder-amplifier combination
Coaxial cable
Enjoying surround sound
Set “AUDIO OUT” to “OFF”
(
page 19, “HDMI” menu), and change
“PCM OUTPUT”, “DOLBY DIGITAL”,
“DTS” and “MPEG” (
page 19, “AUDIO”
menu).
Connect the AC mains lead last
Batteries
Insert so the poles (
4
and
3
) match those in the remote
control.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.
use different types at the same time.
heat or expose to flame.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
•
•
•
•
•
•
•
•
To household mains socket
AC IN
R6/LR6, AA
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Use
Aim at the remote control sensor (
page 9), avoiding
obstacles, at a maximum range of 7 m directly in front of the
unit.
You cannot use DTS Digital Surround
decoders not suited to DVD.
•
STEP 2 The remote control
AC mains lead
(included)
STEP 3 QUICK SETUP
1
Power on.
Select
2
3
Follow the message and
make the settings.
5
Press to exit.
Register
Turn on the television and select the appropriate video input on the television.
To change these settings later, select “QUICK SETUP” (
page 19, “OTHERS” menu).
Shows QUICK
SETUP screen.
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
Back of the unit
4
Press to finish
QUICK SETUP.
RQTC0145-B.indd 8
2007-3-19 16:05:35
