21
9.1.3.
Top Panel
1. Remove the 5 Screws (A).
2. Expanded the both ends of the back of the top panel in
the direction of arrow (1), and then remove it pull up in the
direction of arrow (2).
9.1.4.
Front Panel
1. Insert paper clips, etc. into the hole on the bottom of DVD
Drive, and slide thelever in the direction of arrow to eject
tray slightly.
2. Unlock 2 tabs.
3. Remove the Wire with Connector (A).
4. Remove the Wire with Connector (B).
5. Unlock 3 tabs.
6. Remove the Front Panel.
(The Front Panel is detached from the Tray while inclined
a little as shown below.)
9.1.5.
Front P.C.B. and SW P.C.B.
1. Remove the 5 Screws (A).
2. Remove the 2 Earth Plates.
3. Remove the Wire with Connector (A).
4. Unlock tab.
5. Remove the Front P.C.B. and SW P.C.B..
Summary of Contents for DVD-S485GW
