Panasonic DVD-LS80P, Service Manual

Page: 22 / 70

9.3. Service Mode Table 1
Pressing buttons PLAY, RETURN and TOP MENU in same time at the unit. Service mode menu will be display.
Select menu by cursor and press the Enter button.
Player buttons Display Application Note
SET
PLAY
+
RETURN
+
TOP MENU
Display ErrorCode Displaying the UHF display F_ _ _ Refer to section 9.4. Self-
Diagnosis Function (UHF
Display).
Display Jitter Jitter check, tilt adjustment
*Display shows xx_yyyzz
"xx" and "zz" shown to the right have nothing to do with the jitter
value. "xx" is the error counter, while "zz" is the focus drive value.
Refer to section 11.4. for Optical Pickup Tilt Adjustment
Procedure. Refer to section 11.4.
Optical Pickup Tilt
Adjustment
Display Region Checking the region numbers and broadcast system
Display Version Checking the program version Check the IC3008 FLASH
ROM program.
Lighting Confirmation Function Lighting Confirmation Function of Display Tube
Display DVD/CD LASER
Current
Checking the laser drive current Refer to section 8.5.
Optical Pickup
Replacement Procedure.
Write LASER Current Value Writing the laser drive current value after replacing the optical
pickup (do not use for anything other than optical pickup
replacement)
9.4. DVD Self Diagnostic Function-Error Code
Error Code Error Content Additional error explanation Defect 1 Defect 2 Defect 3 Defect 4
U, H error
U11 Focus error
U15 DVD-R not finalized
H01 Tray loading error
H02 Spindle servo error (Spindle servo, DSC SP motor, CLV servo error)
H03 Traverse servo error
H04 Tracking servo error
H05 Seek error
H06 Power error Cannot switch off the power because of the panel
and system computer communication error
H07 Spindle motor drive
error
DSC related
F500 DSC error DSC stops in the occurrence of servo error (start
up, focus error, etc) OPU DV5.0
(IC3001)
DV5.0
(IC3001)
servo drive
F501 DSC not Ready DSC-system computer communication error
(Communication failure caused by idling of DSC)
DV5.0
(IC3001)
DV5.0
(IC3001)
F502 DSC Time out error Similar disposal as F500 OPU DV5.0
(IC3001)
DV5.0
(IC3001)
servo drive
F503 DSC communication
Failure
Communication error (result error occurred
although communication command was sent)
DV5.0
(IC3001)
DV5.0
(IC3001)
EEPROM
(IC3002)
F505 DSC Attention error Similar disposal as F500 OPU DV5.0
(IC3001)
DV5.0
(IC3001)
servo drive
F506 Invalid media Disc is flipped over, TOC unreadable,
incompatible disc
DISC DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
ODC related
F600 Access failure to
management
information caused by
demodulation error
Operation stopped because navigation data is not
accessible caused by the demodulation defect DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
F601 Indeterminate sector ID
requested Operation stopped caused by the request to
access abnormal ID data DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
F602 Access failure to LEAD-
IN
caused by
demodulation error
LEAD IN data unreadable
F603 Access failure to
KEYDET caused by
demodulation error
Access failure to CSS data of disc
F610 ODC abnormality No permission for command execution DV5.0
(IC3001)
F611 6626 QCODE don’t
read Error
Access failure to seek address in CD series DV5.0
(IC3001)
F612 No CRC OK for a
specific time
Access failure to ID data in DVD series DV5.0
(IC3001)
22
DVD-LS80P / DVD-LS80PC / DVD-LS82P / DVD-LS82PC / DVD-LS850P