Ad
v
a
nc
ed ope
rations
RQT69
7
7
22
Changing settings
For analog connection (
➜
page 7)
Change speaker presence and size
a
, delay time
b
, and channel
balance
c
to suit the speakers you have connected when you select
“Multi-channel” (3 or more speakers are connected).
1. Press [
3
,
4
,
2
,
1
] to select the item and press [ENTER].
2. Press [
3
,
4
] to select the setting and press [ENTER].
Icon examples:
Surround speaker (LS)
≥
Large:When the speaker supports low-frequency (under 100 Hz)
reproduction.
≥
Small:Select when the speaker does not support low-frequency
reproduction.
If the subwoofer is set to “No”, the front speakers will automatically be set
to “Large”.
(Effective when playing multi-channel discs)
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position. If
you have to place the center or surround speakers closer to the seating
position, adjust the delay time to make up for the difference.
If distances
d
(from the center speaker) and
f
(from the surround
speakers) are the same as or greater than
e
(from the front speakers),
leave the delay time as “0”, the factory preset.
If either distance
d
or
f
is less than
e
, find the difference in the relevant
table and change to the recommended setting.
Changing the delay time
1. Press [
3
,
4
,
2
,
1
] to select the delay time box and press
[ENTER].
2. Press [
3
,
4
] to adjust the delay time and press [ENTER].
1. Press [
3
,
4
,
2
,
1
] to select “Test” and press [ENTER].
A test signal is output from one speaker at a time, starting with the
front left speaker and proceeding clockwise.
Front (L)
_—)
Center
_—)
Front (R)
:
;
Surround (LS)
(—————=
Surround (RS)
2. While listening to the test signal, press [
3
,
4
] to adjust the
volume of the center and surround speakers so they are the
same apparent volume as the front speakers (
s
6 to
r
6).
(The front speakers cannot be adjusted here.)
3. Press [ENTER].
The test signal stops.
≥
No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [
3
,
4
,
2
,
1
] to select “Exit” and press [ENTER].
[Note]
The unit may be unable to output as set here due to limitations imposed
by the unit itself or the disc being played. (The display’s “D.MIX” indicator
goes out in these cases.)
Speaker setting
Speaker presence and size (
a
)
Delay time (
b
)
d
Center speaker
Difference
Setting
Approx. 50 cm (1
1
⁄
2
feet)
1.3 ms
Approx. 100 cm (3 feet)
2.6 ms
Approx. 150 cm (5 feet)
3.9 ms
Approx. 200 cm (6 feet)
5.3 ms
f
Surround speakers
Difference
Setting
Approx. 200 cm (6 feet)
5.3 ms
Approx. 400 cm (12 feet)
10.6 ms
Approx. 600 cm (18 feet)
15.9 ms
SETUP
SELECT
ENTER RETURN
m s
m s
d B
0
d B
d B
L
Exit
Test
LS
R
SW
C
RS
d B
0
0
0
0
0
b a c
a
a
(LS)
(RS)
a c b c a
c a
Exit
Test
signal
Front (L)
Center
Front (R)
— Surround —
Subwoofer
LS
LS
No
Large
Small
LS
RS
L
R
SW
f
e
d
C
Channel balance (
c
)
