Edit mode
28
Using the DV Cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with DV terminal
and the camera-recorder by using the DV cable (optional)
1
,
high-image-quality dubbing can be done in digital format.
≥
Set to Tape Playback Mode. (Player/recorder)
1
Connect the camera-recorder and digital video
equipment with the DV cable.
2
Set [ADVANCE] >> [REC STDBY] >> [YES]. (Recorder)
≥
You do not have to follow this step when the remote control is
used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
Press the [
3
] button to select [
¥
/
;
] icon.
≥
Or, without operating step 2
While pressing the [
¥
REC] button on the remote control,
press the [
1
] button.
5
Press the [
3
] button to select the [
¥
/
;
] icon again or
press the [
;
] button on the remote control to stop
recording. (Recorder)
6
Stop playback. (Player)
ª
To cancel the standby for recording
When the camera-recorder is standby for recording, press the
[
4
] button and select the [
∫
] icon.
≥
Do not plug or unplug the DV cable during dubbing, or the
dubbing may not be completed properly.
≥
If a picture (bilingual video, etc.) containing main sound and
sub sound has been dubbed, select the desired sound by
[SETUP] >> [AUDIO OUT] on playback.
≥
Even if you use a device equipped with DV terminals such as
IEEE1394, you may not be able to perform digital dubbing in
some cases. For more information, see the instructions for
equipment connected.
≥
Regardless of the menu settings on the recorder, digital
dubbing is carried out in the same mode as the [AUDIO REC]
mode of the playback tape.
≥
The images on the recorder monitor may be disturbed, but it
does not affect the recorded images.
≥
If a picture containing a copyright protection signal (copy
guard) is recorded by the camera-recorder, the picture is
distorted by mosaic-like patterns at playback.
≥
When wide images are input, the display such as the menu
screen or the operation icon is expanded horizontally.
≥
While pictures are input from the DV terminal, the operation
icon blinks on instead of appearing from the side of the screen
when you press the [ENTER] button.
1
DV
DV
STOP
V
/REW
STILL ADV
VOL
¥
REC
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
T
W
DVC20_Eng.book 28 ページ ２００５年１０月３１日 月曜日 午前１０時３６分
