6
Fig. 15
PRACTICAL GUIDE TO INSTALLATION
Properly insulate the area around the fan to
minimize building heat loss and gain. (Fig.15)
Loose fill or batt insulation can be placed
directly over the fan housing in the attic. Our
fans and fan/light combination units do not
create excessive heat that is a common problem
with recessed light fixtures or some
competitor’s fan/light combination. Our
efficient, cool-running motors and our LED lamp
do not create enough ambient heat to be
subjected to these limitations.
HVICertifiedperformancebasedonHVIProcedures915,916and920.
FV-08VRE2
4
6
1.0
120
60
1.0
18.5
11.0
18.5
11.0
1340
1340
80
80
8.6(3.9)
Fan
Lamp
COMPATIBLE DIMMERS (NOT SUPPLIED)
SPECIFICATIONS
The ducting from this fan to the outside of the
building has a strong effect on the air flow, noise and energy use of the fan. Use the shortest,
straightest duct routing possible for best performance, and avoid installing the fan with smaller
ducts than recommended. Insulation around the ducts can reduce energy loss and inhibit mold
growth. Fans installed with existing ducts may not achieve their rated air flow.
mastic or approved foil
faced tape.
Model No.
Exhaust
Air
direction
Voltage
(V)
Noise at
0.1''WG
(sones)
Speed at
0.1''WG
(rpm)
Air volume
at 0.1''WG
(CFM)
Weight
lb. (
kg
)
Power
consumption
(W)
Duct
diameter
(inches)
Frequency
(Hz)
PRODUCT SERVICE
Warning Concerning Removal of Covers.
The unit should be serviced by qualified technicians only.
Your product is designed and manufactured to ensure a minimum of maintenance.
Should your unit require service or parts, call Panasonic Call Center at 1-866-292-7299 (USA)
or 1-800-669-5165 (Canada).
P0916 08VRE2421
Two Riverfront Plaza, Newark, NJ 07102
Corporation
2016
If
you want
to
connect a dimmer, please get the
suitable
dimmer’s
information
from
the
website
which
is
written
on
the
lamp’s
packaging
.