Panasonic DP-MC210 Operating Instructions Manual Download Page 72

Page: 72 / 128

9. Programmable Features

Setting the information for
scan to FTP (LAN connection
only)

This feature can be
programmed only through
the web browser interface.

When you send scanned files to an FTP server, you can register FTP
destinations (up to 6 destinations) to the unit through the web browser interface.

Start Multi-Function Station.

[

Utilities

]

[

Configuration Web Page

]

[

Advance Configuration

]

Type

“root”

as the user name, then enter the password (feature #155 on

page 60).

[

]

Select the

[

Scan Feature

]

tab.

Click

[

Edit

]

next to

[

FTP Server

]

Click

[

Edit

]

next to the desired FTP server.

Enter the server name, IP address, folder directory, etc.

[

Submit

]

Close the web browser.

Note:

If you do not enter a folder directory in step 7, the scanned image will be
saved in the root folder.

Feature/Code

Selection

Summary of Contents for DP-MC210

































































































































Search results

Summary of Contents for DP-MC210

Reviews:

Related manuals for DP-MC210

Brands by name

Popular brands

Panasonic DP-MC210, Operating Instructions Manual

Search results

Summary of Contents for DP-MC210

Reviews:

Related manuals for DP-MC210

Brands by name

Popular brands