7.4 Programming features: Copy
To change the feature settings, see page 49 for details.
Feature
Code
Description
Default
key
Input tray setting
for copy
#460
To set the input tray to use for copy.
Note
• Following options are displayed only when the paper
size and the media type match. If either is changed, this
setting will be changed accordingly.
–
"
#1+#2
"
–
"
#1+#3
"
–
"
#1+#4
"
–
"
#2+#3
"
–
"
#2+#4
"
–
"
#3+#4
"
–
"
#1+#2+#3
"
–
"
#1+#2+#4
–
"
#1+#3+#4
–
"
#2+#3+#4
–
"
#1+#2+#3+#4
*1
Only for models that support the lower input tray 2.
(
)
–
Default copy
resolution
#461
To change the default resolution setting for copying.
Note
•
"
HIGH-RES
"
(page 88) cannot be selected as the
default setting.
1
Page layout hold
#467
To hold the previous page layout setting.
0
Zoom hold
#468
To hold the previous zoom setting.
0
Collate hold
#469
To hold the previous collate setting.
0
Duplex hold
#470
To hold the previous duplex setting.
Note
• When this feature is activated, it will be effective for the
following:
– When making 1-sided originals into 2-sided copies
– When making 2-sided originals into 2-sided copies
• Even if this feature is activated, it will not be effective
when making 2-sided originals into 1-sided copies
(page 90).
• When making 2-sided originals into 2-sided copies, the
original document settings will be reset even if this
feature is activated.
0
Edge hold
#473
To hold the previous edge setting.
0
7.4 Programming features: Copy
Operating Instructions
103
