Setup
15
1
Pull the media tray (
1
) out of the printer while slightly
raising its front portion and remove the tray pad (
2
).
CAUTION:
•
Be sure to hold the media tray with both hands so you
do not drop it.
NOTE:
•
When the tray cover is opened or the multi-purpose tray
is used, you cannot pull the media tray out of the printer.
Be sure to push the multi-purpose tray and close the
tray cover before you pull the media tray out of the
printer or open the front door.
2
Pinch the media guides and slide them to the width of
the media.
3
Slide the length guide unit to adjust it to the media
length. Slide the length guide unit (
2
) while pressing
the
PUSH
mark (
1
) to extend it.
4
Tap the media stack on a level surface to avoid media
jams or skewed printing.
NOTE:
•
Be careful not to leave fingerprints on the media, which
can result in a smudged print.
•
Reusing media (used paper or jammed paper) that has
been fed through the printer once can reduce the life of
the consumables and paper path components.
Loading Media in the Media
Tray
Media Type
Media Weight
Media Size
Plain paper
Bond/Letterhead
Recycled paper
75 -105
g
/m
2
(20 -28 lb.)
Letter, Legal, A4,
B5 (JIS)
Thin paper
60 -75
g
/m
2
(16 - 20 lb.)
1
2
1
1
1
2
Set
u
p
