Panasonic DP-7240, Operating Instructions Manual

Page: 68 / 336

66
2. HOW TO MAKE COPIES
6. Bypass Copying (Cont.)
2
Bypass copying on non-standard size paper
Non-standard size paper should be within the following ranges:
A (Length): 3.9" to 11.7", B (Width): 5.8" to 17"
2
Place the original on the original glass.
1
Place some sheets of paper with their
copy side up on the bypass tray, and
align the side guides to the paper length.
• The message “Ready for bypass feeding” appears.
• Rear side of the side guides of the bypass tray has an indicator
for paper height. The height of the sheets must not exceed this
indicator.
• When using more than one sheet, fan the sheets well before set-
ting them on the tray.
• Do not push the sheets into the entrance of the bypass feeder; it
may cause a paper jam.
When the paper size is larger, draw out the three-stage paper
holder.
A
B
A