Panasonic DP-7240 Operating Instructions Manual Download

Page: 310 / 336

308

10. WHEN THIS MESSAGE APPEARS

11. “Check paper size setting on control panel for drawer N” (Cont.)

Place paper on the bypass tray and select the paper size.

P.61 “6.Bypass Copying”

Place the original and try to copy again.

During printing from the FAX or Printer (using a drawer)

Remove the jammed paper.

P.265 “4.Jam Symbols”

Turn the power ON.

Turn the power of the equipment OFF.

• You cannot shut down the equipment.

Pull out the drawer mentioned in the
message. Then remove all paper in it.

Summary of Contents for DP-7240

















































































































































































































































































































































Search results

Summary of Contents for DP-7240

Reviews:

Related manuals for DP-7240

Brands by name

Popular brands

Panasonic DP-7240, Operating Instructions Manual

Search results

Summary of Contents for DP-7240

Reviews:

Related manuals for DP-7240

Brands by name

Popular brands