Customizing Your Machine
191
Fax Parameter Table
S
e
tt
ing Y
o
u
r
Mac
h
in
e
014
File Acceptance Report
*Invalid
Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will print out after any
memory communication.
Valid
017
Receive Mode
Manual
Setting the reception mode to automatic or manual.
*Auto
022
Substitute Receive
Invalid
Selecting whether the machine receives to memory when the recording
paper runs out, toner runs out or the recording paper is jammed.
*Valid
024
Print Reduction
Fixed
Selecting print reduction mode.
Fixed
: Reduce received document according to setting of Parameter
No. 25.
Auto
: Automatically determines and reduces the incoming document
to print onto the paper loaded in the machine.
*Auto
025
Reduction Ratio
70%
Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected on
Fax Parameter No. 24.
----
100%
026
Polling Password
(----)
Setting a 4-digit password for secured polling. (See page 46)
027
Polled File Save
*Invalid
Selecting whether the machine retains the polled document in memory
even after the document is polled once.
Valid
028
Stamp at MEM. XMT
Invalid
Selecting whether the machine stamps the original documents when
storing the documents into memory.
(Depends on the Stamp setting on the Control Panel)
*Valid
031
Incomplete File Save
*Invalid
Selecting whether the machine retains the document in memory if the
document is not successfully transmitted.
Valid
033
XMT Reduction
Invalid
Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
receiving machine.
*Valid
037
Receive to Memory
(----)
Enter a 4-digit password for printing the received document(s) in
memory by using
.
When
is set to ON, this parameter is not
selectable on the LCD display. (See page 83)
039
PIN Code Access
*None
Selecting the access method (Prefix or Suffix) to dial a number with PIN
Code. (See page 88)
Suffix
Prefix
042
Conf. File Save
*Invalid
Selecting whether the machine saves the confidential polled file even
after the file is polled once.
Valid
* = Factory default setting
No.
Parameter
Setting
Comments
MODE SETTING SELECT MODE RECEIVE TO MEMORY
RECEIVE TO MEMORY
Continued on the next page...
Summary of Contents for DP-2330
