background image

43

Adding the Toner and Replacing Waste Toner Container (

?

?

?

?

?

)

1

Open the Front Cover.

2

Remove the Waste Toner Container by
slowly pulling it towards the left as
illustrated.

3

Seal the container with the enclosed
cap and dispose of it properly.

4

#

Turn the empty Toner Bottle
counter-clockwise until it stops. The
Arrow mark (Unlocked symbol    )
visible on the end of the Toner
Bottle is aligned with the Arrow
mark on the machine.

Note: To prevent toner spill, ensure

that the key is facing upwards
before removing the toner bottle.

$

Pull the empty Toner Bottle out.

Note: If the bottle will not pull out from

the machine, turn the bottle
slightly in either direction to
release the key and try it again.

Cap

Problem Solving/U13

C

For optimum copy quality use the recommended Panasonic toner. Store toner in a cool
dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.

C

When U13 is displayed the Add Toner Warning Indicator will begin to flash. This message
is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed).
This message will continue to be displayed until the bottle is replaced.  When the count-
down counter reaches 0, the copier will stop operating.  To clear the message and enable
the copier to operate, replace the empty toner bottle with a new one.

ATTENTION

?

J

2

1

Continued on the next page...

Summary of Contents for DP-1510P





























































Reviews: