background image

54

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Still Mode (DVD only)

1

Press 

to select “STILL MODE,”
and

press 

SET

 repeatedly

for mode. (See below.)

2

AUTO:

“FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)

FIELD:

“FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with  “AUTO” on some discs.

FRAME:

“FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AUTO” on some discs.

TV Mode (DVD only)

1

Press 

to select “TV MODE,”
and 

press 

SET

repeatedly for mode.
(See below.)

2

4:3 Pan & Scan 

(Factory preset)

 

:

Wide-screen video data is played in Pan & Scan
style (left and right of screen is trimmed.)

• Video data not formatted in Pan & Scan will play

in letterbox style.

4:3 Letterbox

  :

Wide-screen video data is played in Letterbox
style (top and bottom of screen has black margin).

16:9 

:

Set “16:9” when using Wide-screen TV.

Set the screen display style for wide-screen video
material playback.

Set to reduce jitter in a displayed still picture or a motion
picture.

3

Press 

ACTION

to exit this mode.

Press 

ACTION

to exit this mode.

3

Press 

ACTION

*

to display DVD MAIN MENU.

Press 

ACTION

to display DVD MAIN MENU.

Pan & Scan (Factory preset)

Letterbox

Example

SET

ACTION

SELECT

 

Settings for DVD Operation (continued)

DVD  MAIN  MENU

SELECT

:  

SET

: SET

END

: ACT I ON

D I SC  LANGUAGES
AUDIO  OUTPUT

ST I L L   MODE

: AUTO

TV  MODE

: 4 : 3   P a n & S c a n

PROGRESSIVE  OUT : OFF

DVD  MAIN  MENU

SELECT

:  

SET

: SET

END

: ACT I ON

D I SC  LANGUAGES
AUDIO  OUTPUT
ST I L L   MODE

: AUTO

TV  MODE

: 4 : 3   P a n & S c a n

PROGRESSIVE  OUT : OFF

D4754S P36-72 (040202).p65

2004/02/02, 13:23

54

Summary of Contents for DoubleFeature PV-D4754S









































































Reviews: