41
*Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
• “ON” is set ..... When a DVD is played back, the average volume is increased.
• “OFF” is set .... The volume level recorded on the disc is played back just as it is.
Setting the VOLUME ADJUST (DVD only)
Press
VOL.ADJ
repeatedly to change “OFF”
↔
↔
↔
↔
↔
“ON.”
• “OFF” or “ON” lights up on Multi Function Display (about 3 seconds) when
VOL.ADJ is pressed.
Some DVD
[Low volume level]
VOLUME ADJUST “OFF”
Volume is at the original level.
VOLUME ADJUST “ON”
Volume level is increased
when played back.
Some DVDs are recorded in lower than average volume levels.
For these DVDs, this DECK can be set so that the average volume is increased automatically.
• While settings can be made with all discs, they may have no effect with some discs.
Please set as you prefer.
• When audio equipment is connected, setting the Sound Output level to “OFF” is recommended.
• If the sound becomes abnormal while playing a disc, set the Sound Output level to “OFF.”
Notes
VOLUME
ADJUST
DVD
Operation
PV-D4734S P36-72 (040202).p65
2004/02/02, 13:13
41
