Panasonic DMRE80HP, Service Manual

Page: 37 / 180

Display
Diagnosis Description FL display
F01 Drive hardware
error Display appears when drive unit error is
detected. The event is saved in memory.
Remains displayed.
F12 Initialization error
when main
microprocessor
is started up for
program
recording Display appears when initialization error is
detected after starting up main
microprocessor for program recording. The
event is saved in memory.
Remains displayed.
UNSUPPORT
Unsupported
disc error *A disc an unsupported format was played,
even though the drive starts normally.
*The data format is not supported even
though the media type is supported.
NO
READ Disc read error *A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
HARD
ERR Drive error The drive detected a hard error.
RECOVER
Restoration
operation Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, thereis the possibility that
defective Digital P.C.B. / RAM drive.
10.3. The information table of an error generating disk
10.3.1. Error generating disk type
37