7
RQT7559
Ge
tt
in
g s
ta
rte
d
≥
The equipment connections described are examples.
≥
Before connection, turn off all equipment and read the appropriate operating instructions.
≥
Peripheral equipment and optional cables sold separately unless otherwise indicated.
The connection will allow the video cassette recorder to be used for playback when this unit is turned off. Change the video input appropriately
on the television. For optimum operation, it is recommended that this unit be connected as shown below.
∫
The unit’s RF OUT terminal
The picture and sound signal from this unit does not go through the
RF OUT terminal to the television.
Make sure you connect one of the following terminals on this unit to
the television: the AUDIO/VIDEO OUT terminal, the S-VIDEO OUT
terminal or the COMPONENT VIDEO OUT terminal. If the
television has none of these terminals, consult your local dealer.
≥
Refer to page 9 if the antenna connector doesn’t match.
Do not connect the unit through a video cassette recorder
Video signals fed through video cassette recorders will be affected
by copyright protection systems and the picture will not be shown
correctly on the television.
≥
When connecting to a television with a built in VCR, connect to
the input terminals on the television side, not the VCR side.
Connection with a television and video cassette recorder
Y
P
B
P
R
R - AUDIO - L
VIDEO S-VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
OPTICAL
G-LINK
(L1)
(L3)
COMPONENT
VIDEO OUT
(480P/480I)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
IN1
IN3
R - AUDIO - L
VIDEO S-VIDEO
R - AUDIO - L
VIDEO S-VIDEO
OUT1
OUT2
VHF/UHF
RF IN
RF OUT
VHF/UHF
RF IN
VHF/UHF
RF OUT
AUDIO
R
AUDIO
L
VIDEO
IN
AUDIO
R
AUDIO
L
VIDEO
OUT
OUT
IN
VHF/UHF
RF IN
COMPONENT
VIDEO IN
AUDIO IN
R L
S VIDEO IN
VIDEO IN
Cable from wall or antenna signal
Television
To household AC outlet
(AC 120 V, 60 Hz)
Video cassette recorder
Cooling fan
AC power supply cord
Connect only after all other connections are complete.
This unit
Audio/Video cable
Splitter
indicates included accessories.
indicates accessories not included.
To IN1 (L1)
When connecting using these terminals, ensure
you connect the audio cables to the corresponding
audio input terminals on the television.
S-VIDEO OUT terminal
Connect to S-VIDEO IN terminal on the television
through a S-Video cable.
The S-VIDEO OUT terminal achieves a more vivid
picture than the VIDEO OUT terminal. (Actual
results depend on the television.)
COMPONENT VIDEO OUT terminal
Connect to COMPONENT VIDEO IN terminals on the
television through a component video cable.
These terminals can be used for either interlace or
progressive output (
➡
page 53) and provide a purer
picture than the S-VIDEO OUT terminal.
≥
Connect to terminals of the same color.
≥
If using a BNC cable, use the BNC-RCA adaptor
plug (included) on the unit terminals.
75
≠
coaxial cable
Yellow
White
Red
Red White Yellow
To OUT1 or OUT2
Audio/Video cable
75
≠
coaxial cable
Red White Yellow
Red White Yellow
Television
Television
This unit
VCR
VCR
This unit
7559en.book Page 7 Thursday, March 10, 2005 8:55 AM
