24
RQT8866
Preparation:
Turn on the unit.
[RAM]
If the disc is protected, release protection
(
¼
60).
When the output signal from the external device is
NTSC, change the “TV System” to “NTSC” in the
Setup menu (
¼
67).
This unit cannot record NTSC signals to discs that
already have PAL signal recordings. (However, both
types of programmes can be recorded onto the
HDD.)
To reduce noise in input from a video cassette
recorder, set “AV-in NR” to “On” in the on-screen
display (
¼
59).
DRIVE
SELECT
to select the HDD or DVD
drive.
− If you selected the DVD drive, insert a disc
(
¼
78).
REC MODE
to select the recording
mode (
¼
20).
Recording from a VCR, etc.
Connect cables while both the unit and the external
device are turned off.
Front of the unit
REC
OPEN
/CLOSE
L/MONO - AUDIO- R
VIDEO
S VIDEO
AV3 IN
You can get a
sharper, clearer
picture by connecting
with an S Video cable
instead of the yellow
video cable.
Yellow White Red
S Video cable
Audio/
video cable
[HDD] [RAM]
[-R]
[-RW‹V›]
[+R]
[+RW]
Start play on the external device.
REC
at the point you want to
start recording to the disc.
SELECT
INPUT
to select the input where
your external device is connected.
–
Front panel inputs are AV3.
Tips
You can also connect to the AV2 on the rear.
If the audio output of the external device is monaural, connect to
L/MONO on the AV3 input terminals at the front.
Notes
When timer recording starts while recording from an external
device, timer recording takes priority and recording from the
external device stops.
Recording from an External Device
DMR-EX77̲87EB.indb 24
DMR-EX77̲87EB.indb 24
2007/03/20 20:27:46
2007/03/20 20:27:46
