19
RQT7444
Reco
rd
in
g
≥
Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
∫
To change a programme
Press [
3
,
4
] to select the programme and press [ENTER].
(
➡
page 18, step 3)
∫
To delete a programme
Press [
3
,
4
] to select the programme and press [
¢
CANCEL].
∫
To exit the timer recording list
Press [PROG/CHECK].
∫
To put the unit on timer recording standby
Press [
F
TIMER].
The unit turns off and “
F
” lights on the unit’s display to indicate timer
recording standby has been activated.
≥
Programmes that failed to record are displayed gray. They are
automatically deleted from the timer recording list at 4 a.m. two
days later.
Check, change or delete a programme
Mode
Disc
space
Stop
Start
No.
Name
Date
1:58 SP
TIMER
RECORDING
Remain
12:56:00 15. 7. TUE
New Timer Programme
SELECT
ENTER
RETURN
Press ENTER to store
new programme.
Icons
[
This programme is currently recording.
W
The times overlap those in another programme.
Recording of the programme with the later start time
starts when the earlier programme finishes recording.
F
The disc was full so the programme failed to record.
The material was copy-protected so it was not recorded.
X
The programme did not complete recording because the
disc is dirty or some other reason.
Message displayed in the “Disc space” line
OK:
Displayed if the recording can fit in the
remaining space.
>
(Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the disc.
! :
It may not be possible to record because:
≥
the disc is write-protected
≥
there is not enough space left
≥
the number of possible titles has reached its
maximum.
7444en.fm 19 ページ ２００４年２月１７日 火曜日 午後８時５８分
